NOMINAL TUBOLAR DEPTH FILTER

The "MF" nominal tubolar depth filter is designed for efficient and precise removal of particulate impurities from liquids. It is spun from 100% pure polypropylene and designed specifically for fluid filtration applications where high performance of filtering efficacy is required.
The "MF" nominal series of filters may be used as a final filter or as a pre-filter in order to save very expensive sub-micron absolute filters. They may be used alone or in combination with other filter system depending on need. These filters are recommended for fluid filtration in many applications which include: Food - Electroplating - Chemicals and petrochemicals - Printing.
FEATURES
  Constant filtration
  High performance of filtration
  100% pure polypropylene free of resin or bonding agents
  Heat bonded fibers
  Vast chemical compatibility
  wide range of lenghts, one piece element
BENEFITS
  Precise removal of particles
  Lower cost
  FDA material suitable for food applications
  Non-shedding of filter material

FLOW PERFORMANCE

The chart at the bottom Shows the excellent characteristics related to the flow and pressure drop of the "MF" filter element. This test was performed with clean water to show the relation between flow rate and pressure drop for six 10" elements rated at 1 mm, 3 mm, 5 mm, 10 mm, 30 mm, 90 mm.

FILTERING EFFICIENCY

The MF nominal filters have been tested to achieved at least 95% of filtration. As an example the MF 10 FR N 10 filter will stop at least 95% of all 10 mm particles. The unusually hgh loading capacity of the MF elements is achieved by a large surface area of available filtration material.

TECHNICAL SPECIFICATIONS
  Lenghts: 10" - 20" - 30" - 40"
  Outside diameter: 64 mm
  Inside diameter: 28 mm
  Working temperature: 0 - 85 °C
  Micron ratings: 1 to 90 mm